JIANDAXIN
9.8 mm(3/8″) Aluminum Blind Rivets with Steel Mandrel, Heavy-Duty Pop Rivets
9.8 mm(3/8″) Aluminum Blind Rivets with Steel Mandrel, Heavy-Duty Pop Rivets
Verfügbarkeit für Abholungen konnte nicht geladen werden
Heavy-Duty Pop Rivets
9.8 mm(3/8″) Aluminum Blind Rivets with Steel Mandrel, Heavy-Duty Pop Rivets
Open-end round-head blind rivets with an aluminum alloy body and steel mandrel, available in confirmed lengths and pack quantities for general fabrication, panel assembly, enclosure work, and repair.
Large-Diameter Size
Confirmed 9.8 mm body diameter for applications requiring a larger blind rivet.
Aluminum Body
Lightweight aluminum alloy rivet body for general fabrication and panel work.
Steel Mandrel
Confirmed steel mandrel provides the pulling element required during installation.
Tool Compatibility
Because the 9.8 mm rivet uses a 6 mm mandrel, a compatible high-capacity electric or pneumatic rivet gun is required. Standard manual riveters are not suitable for installation.
Construction
Open-End Blind Rivet Design
The round-head aluminum alloy body is installed from one accessible side while the steel mandrel supplies the pulling action required to form the joint. Select the rivet by its confirmed size and grip range, and verify tool and nosepiece compatibility before installation.
Applications
- Sheet metal assemblies and panel fastening
- Equipment enclosures and housing assembly
- General workshop fabrication and repair
- Furniture, ducting, and vehicle body panel repair for suitable non-critical joints
Selection Guide
- Match the grip range to the total combined thickness of the materials being fastened.
- Select only from the confirmed length and pack combinations shown for this product.
- Confirm the riveter capacity, nosepiece compatibility, hole fit, and available rear clearance before installation.
- Engineering review is required for load-bearing, safety-critical, regulated, high-temperature, or other demanding applications.
Grip Range by Size
Grip range refers to the total combined thickness of the materials being fastened.
| Rivet Size | Grip Range |
|---|---|
| 3/8″×19/32″ (Ø9.8×15 mm) | 0.078″-0.196″ (2-5mm) |
| 3/8″×45/64″ (Ø9.8×18 mm) | 0.157″-0.275″ (4-7mm) |
| 3/8″×13/16″ (Ø9.8×21 mm) | 0.236″-0.354″ (6-9mm) |
Technical Specifications
| Rivet Type | Blind Rivet |
|---|---|
| Structure | Open-End |
| Head Style | Round Head |
| Rivet Body Material | Aluminum Alloy |
| Mandrel Material | Steel |
| Rivet Diameter | Ø9.8 mm3/8″ |
| Available Lengths | 15 mm (19/32″)18 mm (45/64″)21 mm (13/16″) |
| Pack Quantities | 100 pcs1,000 pcs |
Imperial dimensions are approximate references. For accurate sizing and product selection, use the metric dimensions shown in parentheses.
Size-Specific Dimensions
| Rivet Size | Confirmed Dimensions |
|---|---|
| 3/8″×19/32″ (Ø9.8×15 mm) | Head Diameter: Ø19 mm (3/4″)Head Height: 4.4 mmMandrel Diameter: Ø6 mm |
| 3/8″×45/64″ (Ø9.8×18 mm) | Head Diameter: Ø19 mm (3/4″)Head Height: 4.4 mmMandrel Diameter: Ø6 mm |
| 3/8″×13/16″ (Ø9.8×21 mm) | Head Diameter: Ø19 mm (3/4″)Head Height: 4.4 mmMandrel Diameter: Ø6 mm |
Material & Care
Material and Magnetism Notes
Why can this rivet be attracted to a magnet?
The aluminum alloy body is generally non-ferromagnetic. Any magnetic attraction may come from the confirmed steel mandrel used in this assembly.
What should I consider for wet or outdoor environments?
The aluminum alloy body offers practical corrosion resistance in many general environments, but the steel mandrel and the completed joint may still require additional protection when exposed to moisture, salt, chemicals, or long-term outdoor conditions.
Installation
- Measure the total combined material thickness and select a rivet with the matching confirmed grip range.
- Prepare clean, aligned holes and verify the fit for the selected rivet.
- Insert the rivet body fully through the aligned materials.
- Use the compatible riveter and correct nosepiece for the mandrel diameter.
- Pull the mandrel until it breaks at the intended point, then inspect the installed rivet and joint.
Customization may be available subject to quantity requirements and technical review. Contact us to discuss your specifications and confirm feasibility.
Frequently Asked Questions
Which rivet tool should I use?
Use a compatible high-capacity electric or pneumatic rivet gun rated for this rivet and its 6 mm mandrel. Standard manual riveters are not suitable for installation.
What does grip range mean?
Grip range is the total combined thickness of the materials being fastened. Use the size-specific grip range shown above when selecting a rivet.
Can these rivets be used for safety-critical joints?
Do not rely on general product descriptions for safety-critical selection. Confirm the required strength, joint design, environment, installation method, and applicable engineering requirements before use.
